Polyurethane Foam Sealant
PU FOAM is mainly design for installation and insulation. The product is used for bonding, fixing, installing and sound insulation, heat insulation. It is also suitable for gap filling, gas separation, cracks and breaking holds sealing. The ideal humidity during application is 40% to 60%.
| ADVANTAGE: |
| Suitable for big project; |
| One component and easy to use |
| CFC free and using for wide range of building applications |
| High yield product |
| High thermal and acoustical insulation |
| Time and labor saving, less waste |
| Transportation cost saving |
| Application |
| Installing, fixing and insulating of door and window frames |
| Filling and sealing of gaps, joint, openings and cavities |
| Connecting of insulation materials and roof construction |
| Bonding and mounting |
| Insulating the electrical outlets and water pipes |
| Heat preservation, cold and sound insulation |
| Packaging purpose ,wrap the precious & fragile commodity, shake-proof and anti-pressure |
DIFFERENT QUALITY PU FOAM FOR YOUR REFERENCES:
| STRAW PU FOAM |
GUN PU FOAM |
| BS-555 C |
BS-555 C |
| BS-555 B |
BS-555 B |
| BS-555 A |
BS-555 A |
| BS-666 |
BS-666 |
| BS-888 |
BS-888 |
USAGE INSTRUCTIONS:
Shake the aerosol can for at least 40 seconds; Clean and moisten surfaces with a water sprayer prior to applications; Fit the gun or straw on the adaptor; Firmly screw the can on the adapter and turn the flow adjustment screw; Fill the holes and cavities approximately 50% as the foam will expand. Bottom up during application; Foam will be tack-free in about 10minutes; Excess can be trimmed in about 20minutes; Fresh foam can be removed using foam cleaner or acetone. Cured foam can only be removed mechanically.
